Gelstorm PET bottle adapter
My son had got quite a bit of use out of his Gelstorm blaster, but unfortunately broke the stock rail adapter and we couldn't purchase one separately. I modeled up a rail adapter to suit a standard 600ml PET bottle.
The part can be pretty tricky to print. I have included a few screenshots for print orientation and some ideas about adding in support blockers to make the post print cleaning easier.
This is all designed in OpenSCAD. I have included all required files needed. This design uses NopSCADlib library. You will have to install it if you want to make any changes to the .scad file.
NopSCADlib Github page
Download the .RAR file here
Printer Settings
Material: PLA+ Nozzle size: 0.4mm Layer Height: 0.2mm Infill: 40% Walls: 4 Top and Bottom layers: 4
Back to 3D Printing and Design